Your Nuvio Chiller Pro comes with a convenient remote control, allowing you to manage key features such as temperature, sanitization, and power without using the on-screen controls. This guide explains each button’s function and provides tips for best use.
Remote Control Overview
-
°F Switch:
- Switches temperature display to Fahrenheit.
-
°C Switch:
- Switches temperature display to Celsius.
-
Ozone Sanitization On:
- Starts the ozone disinfection cycle.
-
Sanitization Off:
- Stops the ozone disinfection cycle.
-
Temperature Up (▲):
- Short press: increase target temperature by 0.1°
- Long press: continuous increase.
-
Temperature Down (▼):
- Short press: decrease target temperature by 0.1°
- Long press: continuous decrease.
-
Nuvio Logo:
- Branding only :-)
-
Power Button:
- Turns the Chiller Pro on or off.
Usage Tips
To ensure your remote control operates correctly, follow these best practices:
Remove the battery insulation strip before first use. The remote will not function until this strip is removed.
Point the remote directly at the device during operation. The signal works best when unobstructed.
Keep within range. The maximum effective range is 8 meters (26 feet) with no obstacles between the remote and the chiller.
-
Battery details:
Uses a CR2025 battery.
Average lifespan: up to 2 years under normal use.
Quick Notes
The remote mirrors the same controls found on your display panel and Nuvio App, so you can operate your chiller from whichever method is most convenient.
If your remote becomes unresponsive, check the battery first and ensure there’s a clear line of sight to the receiver on your chiller.
Need Help?
If you have any questions or something is wrong, don't hesitate to contact our 24/7 support team here!