Getting your Nuvio Chiller Pro ready for use is quick and simple! Whether it’s your first setup or you’re reassembling after storage, following these steps will help ensure the chiller is positioned, connected, and ready for an optimal cold plunge experience.
This guide covers everything from unpacking your Chiller Pro to connecting it to the Nuvio App.
Before you begin, you can also watch this quick setup video for guidance:
Detailed Instructions
1. Tub/pod setup & filling: If you're using the Chiller Pro with one of our Pods, first follow the setup guide to set it up and fill it (if you're using any other tub, fill it):
Long Recovery Pod Pro Setup & Manual
Recovery Pod Pro Setup & Manual
Recovery Pod Setup & Manual
For efficient cooling, always fill it to the lowest level possible where you can still submerge your body.
2. Positioning the Chiller: Unbox the chiller & place it on a flat, stable surface next to your tub or pod. Keep at least 20 inches of space on all sides of the Chiller for proper airflow and DO NOT cover it. Then remove the protective film from the Chiller screen.
3. Connecting the pump filter: Take the hose with the water pump attached and gently pull to remove the black cap from the end and store it safely. Then twist to securely connect the provided stainless steel filter.
4. Connecting the pump hose: Take the hose with the water pump attached and connect it to the left port of the Chiller (tighten as much as possible and ensure the black rubber gaskets are included to avoid leakage). Fully submerge the water pump and stainless steel filter in the water. Then plug the pump power cord into the back of the Chiller (it's important that you do this AFTER fully submerging the pump).
5. Connecting the other hose: Take the other hose with the weighted water filter attached and connect it to the right port of the Chiller (tighten as much as possible and ensure the black rubber gaskets are included to avoid leakage). Place the hose in the water and keep it separated from the other hose to improve water circulation. An optional step for added stability is to slide the provided clamps over near the end of the hoses by the Chiller ports and tighten them securely.
⚠️ Important: Ensure the black rubber gaskets are in place inside the hose connectors and tighten as much as possible to prevent leaks. Monitor for leaks during first use, and tighten if needed.
6. Powering on the Chiller: Plug in the Chiller using the provided power cable and switch on at the power socket.
7. Downloading the App: Download the Nuvio App on the Apple App Store or Google Play Store on the device(s) you want to control the Chiller with. Check out this detailed step-by-step guide on how to connect your Chiller Pro to the Nuvio App.
8. Connecting the App: Open the Nuvio App and create an account, then link the Chiller to your device.
Need Help?
If you have any questions or something is wrong, don't hesitate to contact our 24/7 support team here!