Properly pressing the buttons on your Chiller is essential for accessing and navigating the settings, including the P-Modes.
If your Chiller was purchased before December 17, 2024, it features our legacy display. This article includes step-by-step instructions specifically for operating the legacy display, as well as guidance on effectively using the Mode and Set buttons to avoid any confusion.
For Chillers purchased after December 17, 2024, please check out this help article to learn how to operate the buttons on the new display.
Accessing the P-Modes
To enter the P-Modes and adjust settings, follow these steps:
1. Long-Press the Mode Button
- Press and hold the Mode button for 2-3 seconds until the screen changes.
- The display will show 'P1', indicating you have successfully accessed the P-Modes.
- A quick tap will not open the P-Mode settings, so be sure to hold the button long enough.
2. Navigate Through P-Modes
- Once in the P-modes, press the Mode button again (a quick press) to navigate through the different settings, such as P1, P2, P3, and so on.
- Each press will move you to the next mode in the sequence.
- To learn more about each P-Mode, we have this helpful guide for you: Using the Chiller's P1-P6 Mode Settings.
Using the Up and Down Buttons
To change the temperature in your Chiller, use the Up and Down buttons:
1. Press the Set Button
- First, press the Set button to enable the Up and Down buttons.
- This step is required to activate these buttons for changing the settings.
2. Adjust Values
- Use the Up button to increase the value or the Down button to decrease it.
- After making your adjustments, press the Set button again to confirm the changes.
Why Long-Press is Important
- The chiller is designed to prevent accidental adjustments, which is why a long-press is required to access P-modes.
- This ensures intentional changes, protecting your chiller’s settings from unintentional modifications.