Skip to main content

Cleaning Your Recovery Chiller

Updated

Regular maintenance of your Nuvio Recovery Chiller is essential for ensuring its optimal performance and longevity. This article provides step-by-step instructions on cleaning the chiller case and pump safely and effectively.

 

Why Regular Cleaning is Important

  • Prevents dirt and debris build-up that can affect performance.
  • Ensures the chiller operates efficiently over time.
  • Helps maintain hygiene, especially in high-use environments.

 

Prevent Bacteria and Dirt Build-Up

To keep your chiller water clean and prevent bacteria and dirt build-up, we recommend using our specially formulated All-in-One Water Cleaner. This product helps maintain water hygiene and reduces the frequency of cleanings by preventing unwanted contaminants.

 

Cleaning the Chiller Case

The chiller case should be cleaned every two weeks to maintain its appearance and prevent dirt accumulation. Follow these steps:

  1. Turn Off and Unplug the Chiller

    • Always ensure the unit is powered off and unplugged from the outlet before cleaning.

  2. Prepare a Mild Cleaning Solution

    • Mix a small amount of mild detergent with water to create a diluted cleaning solution.
    • Avoid harsh chemicals or abrasive cleaners, as these can damage the surface.

  3. Wipe Down the Chiller Case

    • Use a soft cloth dampened with the cleaning solution to gently wipe the exterior of the chiller.
    • Pay extra attention to areas where dirt or residue might accumulate.

  4. Rinse and Dry

    • Rinse the cloth with clean water, wring it out, and wipe away any detergent residue.
    • Use a dry cloth to thoroughly dry the surface.

 

Cleaning the Pump

The pump is a vital component of your chiller and should also be cleaned regularly to ensure smooth operation. Here's how to clean them:

  1. Turn Off and Disconnect the Pump

    • Make sure the pump is turned off and and the chiller is disconnected from the power supply.

  2. Prepare a Cleaning Solution

    • Mix a mild detergent with water to create a gentle cleaning solution.
    • Avoid using corrosive or harsh cleaners.

  3. Clean the Pump Exterior

    • Use a soft cloth or sponge dipped in the cleaning solution to wipe the pump's exterior.

  4. Brush for Deep Cleaning

    • For stubborn dirt or hard-to-reach areas, use a soft brush to gently scrub the pump.
    • Ensure the brush bristles are not too stiff, as they may damage the pump's surface.

  5. Rinse and Dry

    • After cleaning, rinse the pump with clean water to remove detergent residue.
    • Dry thoroughly with a soft towel before reconnecting or using.

 

Additional Tips

  • Always ensure all components are completely dry before powering on the chiller or pump.
  • Use only mild detergents to avoid damaging sensitive materials.
  • Schedule cleanings every two weeks for best results, or more frequently if used in high-demand environments.

Related articles