Getting your Nuvio Sauna ready for use is quick and simple! Whether it’s your first setup or you’re reassembling after storage, following these steps will help ensure the sauna is assembled, connected, and ready for an optimal experience.
Detailed Instructions
1. Carefully remove all components from the packaging and ensure you have all the parts listed in the user manual.
2. Begin by connecting the supporting poles using the provided pole connectors to form the bottom base of the sauna.
3. Then, place the bottom base inside the sauna cover before assembling the sides. This part may feel tight-fitting, but that helps retain heat effectively.
4. Once the base is correctly in place, continue assembling the sides of the sauna, securing the supporting poles and ensuring they fit snugly.
5. Attach the corner brackets at each corner to reinforce the structure. Ensure all connections are firm and stable.
6. Gently pull the cover over the assembled frame, checking it's properly aligned. Leave the cover unzipped for the moment.
7. Place the steam box inside the sauna and align it with the designated opening. Connect the steam box to this opening using the provided shorter tube and tube connector.
8. Attach the longer tube to the steamer unit on the other end of the opening. Fill the steamer unit with water (max. capacity: 2.6L), then securely plug the unit directly into an appropriate power outlet.
9. Place the foldable chair inside the sauna. Using the remote control, select your desired temperature and timer settings for the session.
10. Allow the sauna to preheat for 5-10 minutes to reach the optimal temperature. Once ready, step inside and enjoy your recovery session!
NOTE: Setting up your Nuvio Recovery Sauna is quick and easy, it takes just about 30 minutes!
Need Help?
If you have any questions or something is wrong, don't hesitate to contact our 24/7 support team here!